Gardens
Plants
Journals
Forums
Questions
Seed Swaps

2011 - Backyard Raised Beds Garden

Just getting started with my first attempt at gardening.
Built two 4′×8′ Raised Beds, one for Strawberries, and one for Chili Peppers.
Built a Little Hoop Hut for the peppers. Also planted some Heirloom Tomatoes in pots, and some corn, basil, and oregano.

Next Year I will build two more Raised Beds next to these, but was on a budget this year, plus didn’t want to overwhelm myself on my first garden attempt..

An outdoor organic garden located in Beaverton, United States, Squizza's 2011 - Backyard Raised Beds garden currently contains 0 plants.

This is a Backyard garden that is known to be in USDA Hardiness Zone 8. It has mainly Combination soil and receives Full Sun light.

Photos


Plantings


Comments

Tralamander

Tralamander

Folia Helper

United Kingdom8b

What’s the plastic stuff covering this? I’d love to know more about its construction. It looks so pro! x

Posted on 04 Aug 11 (about 4 years ago)

Well, its far from pro. The design was pretty much limited to using what materials I had laying around since I was on a budget and wanted to spend as little as possible. Also I wanted to make something that I could easily (with 2 people) move between each of the raised beds since they are all the same length/width.

The wood was all stuff just left over from various projects.
I used two 4×4 to support the hut on top of the raised beds that connects to the 2 vertical 2×6′s with a 2×4 at the top. Two left over 2×6′s run the length of the bed to connect to the other side.

I sourced some 1/2" PVC pipe from craigslist and cut 4 of them to 7’ lengths (Anything shorter just wouldn’t bend like it needed too.

I used 1/2" conduit clamps to attach the pvc pipe to the 2×6′s. Think I used 2 at each location.

Since I was on a budget the plastic is just the stuff you get at home depot. Not the best for this project or the most durable. When I can budget the expense I will probably try and get something a little better in quality and functionality.

I then used 3/4" pvc pipe that I cut about 25% of the circumference out of to make it look like a ‘C’ and then I cut those in 1/2" pieces and used those to clip the plastic to the pvc pipe.

Then I just used a staple gun anywhere else I needed to attach it to the wood.

To access the inside easily I just made the sides out of pvc covered in plastic, and drilled holes in each corner.
On the sides of the hut I put some double sided screws (Sorry dont remember what they’re actually called) in the 2×6′s that the walls slide over, then I use wing nuts to hold them on. (Actually I stopped using them since the walls seem to stay on just fine without screwing them down).

So pretty simple, but seems to be holding up, I guess we will see how it looks after winter. But since winters here aren’t too bad I am hoping it will hold up OK.

Posted on 04 Aug 11 (about 4 years ago)

Would you like to add a comment? Sign up for a free account, or log in if you're already a member.